{"product_id":"sonax-profiline-dosierkappe-dosierhilfe","title":"PROFILINE Dosing Cap Dosing Aid","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003eControlled Dosing of Cleaning Concentrates — SONAX PROFILINE Dosing Cap in Operation\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE dosing cap special? The dosing aid with a dip tube replaces the original cap of cleaning agent bottles and allows for precise, controlled dispensing of defined quantities — for economical use of concentrates in professional detailing operations.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn professional vehicle detailing operations, a variety of cleaning concentrates are used — all-purpose cleaners, interior cleaners, wheel cleaners, shampoo concentrates — which must be diluted to the correct mixing ratio before use. The \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e is the tool that transforms this daily routine into precise, reproducible, and economical work. The dosing system with a dip tube replaces the original bottle cap and allows for the controlled dispensing of a defined amount per actuation — instead of free pouring with an unpredictable risk of overdosing. The package contains 6 pieces, which can be used simultaneously for different bottle sizes and product types. For businesses that work with several SONAX PROFILINE concentrates in parallel, a set of dosing caps is a logical accessory investment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise dosing prevents product waste and ensures consistent results.\u003c\/strong\u003e A common mistake in operations without a dosing aid is overdosing cleaning concentrates: a too generous pour into the bucket or spray bottle does not increase cleaning performance (which is optimal with correct dilution) but consumes significantly more product than necessary. The SONAX PROFILINE dosing cap counteracts this — thanks to the dip tube and dosing mechanism, a defined amount is dispensed per actuation, even when the bottle is not fully upright. This saves product, reduces operating costs, and ensures that the cleaning solution always has the correct mixing ratio.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHygienic and safe handling of cleaning chemicals in daily operations.\u003c\/strong\u003e The dip tube of the dosing cap reaches the bottom of the bottle, allowing for dispensing even when the bottle is not fully upright or when there is only a small amount of content left. The advantage: no elaborate tilting actions for half-empty bottles, no spilling of cleaning concentrate during dispensing. In professional operations, where concentrated and sometimes skin-irritating chemicals are used, controlled dispensing is an important contribution to occupational safety and the protection of work surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 pieces in a set — for simultaneous use on multiple product bottles.\u003c\/strong\u003e The SONAX PROFILINE dosing cap set contains 6 pieces, which can be mounted simultaneously on 6 different bottles. In a well-stocked detailing operation, typically 3-6 different concentrates are in use at the same time — all-purpose cleaner, interior cleaner, wheel cleaner, shampoo concentrate, insect remover, glass cleaner. With one dosing cap per bottle, each product is immediately ready for use, without having to unscrew the original cap before each dispensing. This speeds up the workflow and prevents mix-ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e The SONAX PROFILINE dosing cap is particularly valuable in combination with the \u003ca href=\"\/en\/products\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger\"\u003eSONAX PROFILINE MultiStar All-Purpose Cleaner\u003c\/a\u003e as an all-purpose cleaner concentrate: The MultiStar is used in mixing ratios from 1:5 to 1:100 depending on the application — precise dosing is crucial for the correct ratio. It is recommended to calibrate the desired dosing amount per cap actuation once on a test quantity and to record the result for common mixing ratios (e.g., \"3 pumps into 500 ml = 1:X\"). If the dosing cap is used on the SONAX PROFILINE PFA trolley, we recommend labeling the product bottles so that no confusion arises during quick dispensing — especially important if several employees are working with the same trolley.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eDosing system with dip tube — how the SONAX PROFILINE dosing cap works\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e works on the principle of a pump dispenser with a dip tube: The cap is screwed onto the bottle (or pressed on, depending on the bottle opening), with the integrated dip tube reaching to the bottom of the bottle. When the dosing mechanism is actuated, a defined amount of liquid is transported upwards through the dip tube and dispensed through the cap's outlet opening. The dip tube ensures that the liquid is drawn from the lowest part of the bottle — even with the container held at an angle or with a low fill level, the system works reliably without air pockets or pressure loss.\u003c\/p\u003e\n\u003cp\u003eA significant advantage over a simple screw cap with direct pouring is the reproducibility of the dispensed amount: Each actuation of the dosing cap dispenses the same defined amount, regardless of how much the bottle is tilted or how quickly the actuation occurs. This allows for the establishment of dosing standards in the operation — after a short time, the user knows how many pumps are needed for the desired concentration in a bucket, a spray bottle, or a measuring cup. This reproducibility is the basis for consistent cleaning results across all applications and all employees.\u003c\/p\u003e\n\u003cp\u003eThe material compatibility of the SONAX PROFILINE dosing cap is designed for use with SONAX PROFILINE cleaning concentrates and similar professional car care products. The materials used are resistant to the typical pH values and ingredients of cleaning concentrates. When storing and using with highly acidic products (e.g., wheel cleaners with low pH), compatibility should be checked on a case-by-case basis. For neutral to slightly alkaline cleaners, the dosing cap is generally fully suitable.\u003c\/p\u003e\n\n\u003ch3\u003eEconomical use of concentrates — what precise dosing means in operation\u003c\/h3\u003e\n\u003cp\u003eThe economic aspect of correct dosing of cleaning concentrates is often underestimated in practice. A concentrate like the \u003ca href=\"\/en\/products\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger\"\u003eSONAX PROFILINE MultiStar\u003c\/a\u003e is designed for a wide dilution range from 1:5 to 1:100 — this means that one liter of concentrate at 1:100 dilution yields 100 liters of ready-to-use cleaner. With uncontrolled dosing by free pouring, this economic potential is quickly nullified: if, out of carelessness, 30 ml are poured into the bucket instead of the recommended 10 ml, consumption per application is tripled without improving cleaning performance — because overdosing does not improve cleaning performance, and in some products, it can even be more problematic (e.g., due to more difficult rinsing or residue formation).\u003c\/p\u003e\n\u003cp\u003eThe SONAX PROFILINE dosing cap makes this economic calculation simple: the operator calibrates the number of pumps for the desired mixing ratio once and can then adhere to this standard reliably and reproducibly. In an operation that washes 20-50 vehicles daily and consumes several concentrates, the investment in dosing aids quickly pays for itself through reduced concentrate consumption. For a concentrate with 1:20 dilution and a daily consumption of 10 liters of application solution, this is 500 ml of concentrate per day — any overdose of 20% means 100 ml of extra consumption daily, which adds up to significant additional costs over a year.\u003c\/p\u003e\n\u003cp\u003eFor operations with multiple employees, standardized dosing via the dosing cap is also a quality control instrument: different users typically dose differently if there is no clear dosing system. With the SONAX PROFILINE dosing cap, the mixing ratio is reproducibly the same for all employees, contributing to consistent cleaning results and reliable product calculation.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application for the SONAX PROFILINE dosing cap — for which products it is most beneficial\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e is particularly valuable for concentrates with a wide dilution range and for products that are used in different concentrations for various applications. All-purpose cleaner concentrates like the MultiStar All-Purpose Cleaner are the classic application: for light soiling (1:50–1:100), medium soiling (1:10–1:20), and intensive cleaning (1:5–1:10), the same base solution is used in different dilutions. The dosing cap allows for quick switching between these concentrations without having to re-estimate consumption each time.\u003c\/p\u003e\n\u003cp\u003eThe dosing cap is also useful for interior cleaner concentrates: interior cleaners are used in different concentrations depending on the substrate (fabric, leather, plastic) and the degree of soiling. A dosing cap on the concentrate allows for quick filling of a spray bottle with the desired concentration without opening and pouring the entire bottle. For practical work — seat by seat, surface by surface — this provides noticeable convenience and efficiency gains.\u003c\/p\u003e\n\u003cp\u003eThe dosing cap is less suitable for highly viscous products (waxes, pastes, gels) that are difficult or impossible to dispense through the dip tube. The system is optimized for liquid to slightly viscous concentrates — aqueous cleaners, shampoo concentrates, liquid deep cleaners, and similar products. If in doubt about suitability for a specific product, a simple test is recommended: attach the dosing cap and briefly actuate it to check if the product is dispensed without problems.\u003c\/p\u003e\n\n\u003ch3\u003eSONAX PROFILINE Dosing Cap in the context of the PFA trolley system — optimal integration\u003c\/h3\u003e\n\u003cp\u003eIn the SONAX PROFILINE PFA trolley accessory system, the \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e plays a specific role: While the \u003ca href=\"\/en\/products\/sonax-profiline-kunststoffablasshahn-fur-3-l-5-l-kanister-zubehor\"\u003eSONAX PROFILINE Plastic Drain Tap\u003c\/a\u003e is designed for dispensing from 3-liter and 5-liter canisters, the dosing cap is intended for smaller bottles (typically 1 liter). Both dosing aids complement each other: large canisters on the lower shelf of the PFA trolley with a drain tap for frequently used basic cleaners; small bottles with a dosing cap for specialized products that are needed in smaller quantities.\u003c\/p\u003e\n\u003cp\u003eThis structured approach to the dosing system is particularly important in operations with multiple employees: if every employee knows which product is on which shelf of the PFA trolley and how to operate the dosing cap, the onboarding of new employees is simplified and the risk of incorrect dosing is minimized. A uniform dosing system is a practical contribution to structured, efficient operational organization.\u003c\/p\u003e\n\u003cp\u003eFor using the dosing cap directly on the \u003ca href=\"\/en\/products\/sonax-profiline-eimer-fur-pfa-wagen-zubehor\"\u003eSONAX PROFILINE Bucket PFA trolley\u003c\/a\u003e, the following procedure is recommended: fill the bucket (clear water in the desired amount), then actuate the dosing caps of the required concentrate bottles and dispense directly into the bucket. This eliminates intermediate measuring in cups and reduces the number of steps to a ready-to-use cleaning solution to a minimum.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the SONAX PROFILINE Dosing Cap — Availability, Compatibility, and Recommendation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE dosing cap\u003c\/strong\u003e is available as a set of 6 pieces — sufficient for simultaneous use on 6 different product bottles or as a combination of active caps and spare parts. The price per set is moderate, and the dosing caps can be reused and transferred to other bottles after a product change, provided the threads are compatible. In case of wear or damage to a cap, replacement sets can be easily reordered.\u003c\/p\u003e\n\u003cp\u003eCompatibility: The dosing cap is designed for the bottle openings of the SONAX PROFILINE product range. Before using with products from other manufacturers, it is advisable to check the thread compatibility — not all bottle openings are standardized, and a non-fitting cap will not seal reliably. In the SONAX PROFILINE assortment, the dosing cap is designed for the common 1-liter bottles and should fit there without adjustment.\u003c\/p\u003e\n\u003cp\u003eConclusion: The SONAX PROFILINE dosing cap is a small, economically and practically valuable accessory component for all businesses that regularly work with SONAX PROFILINE concentrates. Six pieces in a set, precise dosing through the dip tube system, and easy handling make it a recommended addition for every professional detailing operation that wants to optimize product usage and standardize workflows.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"6 pieces","offer_id":57345155072335,"sku":"D1-SNX-2991000","price":9.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-dosierkappe_6-stueck.png?v=1774736535","url":"https:\/\/detailing1.lu\/en\/products\/sonax-profiline-dosierkappe-dosierhilfe","provider":"Detailing1","version":"1.0","type":"link"}