{"title":"Scheinwerferversiegelung","description":"\u003ch2 id=\"speakable-headline\"\u003eScheinwerferversiegelung\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eScheinwerferversiegelung\u003c\/strong\u003e: Versiegelungen schützen freigegebene Scheinwerferoberflächen. Material und Zustand der vorhandenen Schutzschicht entscheiden über das System.\u003c\/p\u003e\n\u003cp\u003eDer Schutz muss zum Scheinwerferkunststoff passen; eine Versiegelung ersetzt weder die Entfernung tiefer Defekte noch eine fachgerechte Reparatur.\u003c\/p\u003e","products":[{"product_id":"meguiars-keep-clear-headlight-coating","title":"KEEP CLEAR Headlight Coating headlight sealant","description":"\u003ch2\u003eMeguiars KEEP CLEAR Headlight Coating headlight sealant — UV protection for clear, like-new headlights for up to a year\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does the Meguiars KEEP CLEAR Headlight Coating headlight sealant do? The aerosol spray lays down a durable UV protective layer on headlights and clear plastics — it stops yellowing, hazing and UV degradation for up to a year. Ideal after any headlight restoration, or to keep new headlights looking new. 4 oz (118 ml).\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eYellowed, hazy headlights are one of the most common cosmetic problems on older cars — and a safety issue that gets underestimated far too often. Clear headlights throw up to 80 % more light than badly clouded lenses. But restore your headlights, or try to look after a fresh set, and you run straight into the next problem: without a proper sealant the UV breakdown of the polycarbonate starts again the moment you finish, and the gloss you worked so hard for is cloudy again within weeks. The \u003cstrong\u003eMeguiars KEEP CLEAR Headlight Coating headlight sealant\u003c\/strong\u003e fixes that: the aerosol spray builds a tough UV barrier on the lens surface that keeps yellowing, hazing and UV degradation away for up to a year — and it goes on as easily as any paint care spray.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV barrier against yellowing and hazing — up to a year of protection.\u003c\/strong\u003e The core of the Meguiars KEEP CLEAR headlight sealant is the UV blocker in the formula: polycarbonate (the standard material for car headlights) breaks down chemically under UV light — the plastic surface oxidises, yellows and turns milky. The KEEP CLEAR coating layer absorbs and reflects UV rays before they ever reach the polycarbonate. The result is a headlight that stays clear and like-new — applied properly, the effect lasts up to a year.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAerosol spray for an easy, even coat with no streaking.\u003c\/strong\u003e The aerosol format gives you a particularly even coat, without the wipe marks and application errors you often get from liquid sealants and an applicator. The spray puts down a fine, even mist that wets the whole lens with no gaps — which also makes it ideal for complex headlight shapes with curves, recesses and awkward corners.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtection against acid rain, salt and road grime — full exterior protection formula.\u003c\/strong\u003e The KEEP CLEAR coating protects against more than UV: it also handles the other main causes of headlight degradation — acid rain, winter road salt and dirt particles thrown up at speed. The protective layer works as a barrier against these aggressive environmental attacks, so it extends not only optical clarity but the life of the lens surface overall.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Always lay the Meguiars KEEP CLEAR Headlight Coating down straight after a headlight restoration — never before. The headlights have to be clean, dry and free of polish residue. For maximum adhesion: degrease the lenses with isopropyl alcohol (IPA) before you spray. Spray from about 20–25 cm in 2–3 thin coats, letting each one flash off for 5 minutes. Don't spray hot headlights (direct sun) — cool, shaded conditions give the best results. Once fully cured (30 minutes), the coating is water resistant.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhy headlights yellow — the physics behind UV breakdown of polycarbonate\u003c\/h3\u003e\n\u003cp\u003eModern car headlights are made of polycarbonate (PC) — a thermoplastic valued for its high impact strength, low weight and optical clarity. Compared with the glass headlights on older cars, though, polycarbonate is UV sensitive: UV-B radiation from the sun chemically splits the polymer chains in the plastic, which is known as photo-oxidation. That reaction first creates microscopic roughness on the surface (hazing), which then progresses into a yellow, cloudy discolouration.\u003c\/p\u003e\n\u003cp\u003eThe process is cumulative: every hour under UV makes the breakdown a little worse — over months and years you get the classic headlight yellowing that shows up on almost every car from about 5–8 years old. UV breakdown speeds up with high temperatures (southern climates, summer heat) and with sanding and cleaning residue that damages the plastic's natural UV stabilising layer.\u003c\/p\u003e\n\u003cp\u003eMost polycarbonate headlights leave the factory with a thin hardcoat that gives a certain amount of UV protection. That layer isn't permanent, though: car washes, abrasives, road grime and mechanical wear strip it away over the years — and once the hardcoat is gone, UV breakdown of the base material takes off fast. That's exactly where the Meguiars KEEP CLEAR Headlight Coating comes in: it replaces the lost hardcoat function with a new, freshly applied UV protective layer.\u003c\/p\u003e\n\u003cp\u003eIt's important to understand that restoring a headlight (sanding and polishing) removes the already oxidised layers and makes the surface clear again — but it does not restore the original UV protection. A polished headlight with no sealant on top is actually more vulnerable to UV breakdown than before, because the polish took off what was left of the hardcoat. The KEEP CLEAR coating closes that gap and is what turns a headlight restoration into a complete, lasting result.\u003c\/p\u003e\n\u003cp\u003eAnother factor that gets overlooked is heat build-up at the headlight: modern LED and xenon units generate less heat than old halogen systems, but direct sun in a car park in summer still takes the lens surface up to 60–80°C. That temperature speeds chemical reactions up considerably — UV breakdown, oxidation and degradation of the natural hardcoat all run faster when it's hot. A heat-resistant sealant like the KEEP CLEAR coating protects the surface reliably under those thermal conditions too and stays stable while it does, without distorting, chalking or clouding the optics.\u003c\/p\u003e\n\n\u003ch3\u003eMeguiars KEEP CLEAR Headlight Coating headlight sealant — step-by-step application\u003c\/h3\u003e\n\u003cp\u003eGetting the application right decides how long the coating lasts and how it looks. Step one is a thorough clean of the lens surface: all dirt particles, bug residue, wax residue and polish residue have to be completely gone. A freshly restored headlight should be wiped down with a clean microfibre towel after polishing and degreased with isopropyl alcohol (IPA, 70–99 %).\u003c\/p\u003e\n\u003cp\u003eThe surface has to be completely dry — even the smallest trace of moisture under the coating can cause blistering or poor adhesion. On damp days or after rain, we'd warm the headlights gently with a heat gun and wait 10 minutes until every last bit of moisture has evaporated.\u003c\/p\u003e\n\u003cp\u003eSpray the aerosol evenly onto the headlight from 20–25 cm. Important: keep the spray off painted bodywork, rubber seals and the car's glass — mask up or cover carefully. Lay the first coat on thin and let it flash off for 5 minutes. Then follow with 2–3 more coats, again with 5 minutes drying time between each. Several thin coats give you a more even, more durable protective layer than one thick one.\u003c\/p\u003e\n\u003cp\u003eAfter the last coat, let it cure for at least 30 minutes before you move the car or let it near water. For best durability we'd give it 2 hours of cure time at room temperature (or 1 hour at slightly raised temperature indoors). The finished result: a crystal-clear, glossy headlight with an invisible UV-protective coating layer.\u003c\/p\u003e\n\u003cp\u003eA common mistake with headlight sealants is an uneven coat caused by spraying from too close or too far. From under 15 cm the coating goes on too concentrated and can run or sag. From over 30 cm part of the aerosol evaporates before it reaches the surface, which leaves you with thinner, patchy coats. The sweet spot of 20–25 cm gives you an even, fine coat that wets the lens completely with no dry overspray zones. If you're using the KEEP CLEAR coating for the first time, do a test pass on a spare part or somewhere less visible to get a feel for the right distance and the right speed.\u003c\/p\u003e\n\n\u003ch3\u003eThe complete headlight restoration — KEEP CLEAR coating alongside other Meguiars products\u003c\/h3\u003e\n\u003cp\u003eThe Meguiars KEEP CLEAR Headlight Coating is the last step of a full headlight restoration. Badly yellowed or hazy headlights need mechanical work before the coating: first take the oxidised layer off with a sanding pad and abrasive, then remove the sanding marks with a polishing pad and compound, and finally bring the surface up to full gloss with a finishing pad and finishing polish. Only after that whole process does the KEEP CLEAR coating go on.\u003c\/p\u003e\n\u003cp\u003eFor lightly to moderately hazy headlights (early-stage UV degradation, no deep scratches) a simple cleaning step with \u003ca href=\"\/en\/products\/meguiars-plastx-clear-plastic-cleaner-polish\"\u003eMeguiars PLASTX Clear Plastic Cleaner \u0026amp; Polish\u003c\/a\u003e is often enough, followed by the KEEP CLEAR coating. PLASTX cleans the surface, pulls out light oxidation and polishes the plastic to a high gloss — and the KEEP CLEAR coating locks that result in.\u003c\/p\u003e\n\u003cp\u003eFor upkeep between restoration cycles, Meguiars quick detailer products work well: they won't damage the KEEP CLEAR coating layer and they keep the headlights clean. A regular wipe with \u003ca href=\"\/en\/products\/meguiars-quik-detailer-mist-wipe\"\u003eMeguiars Quik Detailer\u003c\/a\u003e takes off road dust, bug residue and surface dirt without attacking the protective layer.\u003c\/p\u003e\n\u003cp\u003eRegular care extends the life of the KEEP CLEAR coating considerably: a clean headlight under an intact coating layer holds its UV protection far longer than a neglected one, where dirt and acidic particles settle and slowly eat into the coating chemically. For cars with heavy UV exposure (southern Europe, parked in full sun all summer) we'd top the coating up every 6–8 months rather than yearly.\u003c\/p\u003e\n\n\u003ch3\u003eKEEP CLEAR coating on new cars — why prevention beats restoration\u003c\/h3\u003e\n\u003cp\u003eThe most common use for Meguiars KEEP CLEAR Headlight Coating is as the follow-up to a headlight restoration — but the product is just as good on new or nearly new cars whose headlights are still perfectly clear. Getting in early is always easier and cheaper than restoring later.\u003c\/p\u003e\n\u003cp\u003eNew cars do come with a factory hardcoat on the headlights — but as described above, that breaks down over time. Adding an extra protective layer of KEEP CLEAR coating to factory-fresh headlights extends the life of that original clarity considerably. Owners who treat a new car with KEEP CLEAR from day one can often keep clear, haze-free headlights for 10 years or more — where the first restoration work would otherwise typically be due after 5–7 years.\u003c\/p\u003e\n\u003cp\u003eThe same principle applies if you're buying used: headlights that are still clear and undamaged should be sealed with the KEEP CLEAR coating straight after purchase, before UV degradation starts. Protecting a headlight that's still clear takes far less work than a full restoration — and the result looks identical.\u003c\/p\u003e\n\u003cp\u003eFor cars that see a lot of UV (convertibles, cars without a garage, cars in sunny regions) we'd treat it once a year as standard care, built into the spring detailing cycle. Right after winter, when road salt, grit and low temperatures have really worked the lens surfaces over, a fresh coat of KEEP CLEAR coating is the ideal prep for the intense UV season ahead. Combined with a thorough headlight clean in spring, topping up the KEEP CLEAR coating is a simple, cheap job that keeps the headlight in the best possible optical and functional shape — year after year.\u003c\/p\u003e\n\n\u003ch3\u003eBuy Meguiars KEEP CLEAR Headlight Coating headlight sealant — for permanently clear headlights\u003c\/h3\u003e\n\u003cp\u003eThe Meguiars KEEP CLEAR Headlight Coating headlight sealant is the professional answer for anyone who wants their headlights to stay clear and like-new. The 4 oz (118 ml) aerosol is enough to treat several cars completely, or for several applications on the same car over the course of a year. At €19.90, measured against up to a year of protection and the cost of avoiding headlight restorations or even headlight replacements, it's a very economical investment.\u003c\/p\u003e\n\u003cp\u003eParticularly worth it for any owner who: wants to keep their car looking cosmetically flawless; wants to protect a fresh headlight restoration long-term; wants to act preventively on a new car or a used car with headlights that are still clear; or is after a quick, professional job for the annual spring car care round.\u003c\/p\u003e\n\u003cp\u003eMeguiars KEEP CLEAR Headlight Coating is a logical addition to any detailing set built around complete, lasting car care. Paired with Meguiars PLASTX Clear Plastic Cleaner \u0026amp; Polish for the cleaning and polishing, and Meguiars Microfibre Towels for the application, you get a complete, professional headlight care set that covers every step from cleaning through polishing to long-term sealing.\u003c\/p\u003e\n\u003cp\u003eBottom line: if you restore yellowed or hazy headlights, you have to seal with the KEEP CLEAR coating as the last step — otherwise UV breakdown starts again immediately. And if your headlights are clear, protect them before restoration becomes necessary. Either way the Meguiars KEEP CLEAR Headlight Coating headlight sealant is the right product: easy to use, highly effective, and with protection that lasts up to a year.\u003c\/p\u003e\n\u003cp\u003eOne last practical note for professional detailing businesses and pro car care operators: the Meguiars KEEP CLEAR Headlight Coating works brilliantly as a value-adding add-on with any detail or inspection. An application time of under 15 minutes per car and a convincing, immediately visible effect make it an ideal service building block, adding real extra value for the customer to your detailing menu. The headlight comes out clear as new — a result that visibly lifts the car's value and delights customers, without a lot of extra effort on your side.\u003c\/p\u003e\n","brand":"Meguiars","offers":[{"title":"4 oz (118 ml)","offer_id":57344816611663,"sku":"D1-MEG-G17804EU","price":15.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/Meguiars-KEEP-CLEAR-Headlight-Coating-Scheinwerferversiegelung-4-oz-118-ml_PS1.jpg?v=1775376288"}],"url":"https:\/\/detailing1.lu\/en\/collections\/scheinwerferversiegelung.oembed","provider":"Detailing1","version":"1.0","type":"link"}