{"title":"PROFILINE Wet Sealant — SONAX","description":null,"products":[{"product_id":"sonax-profiline-spray-seal-nassversiegelung","title":"PROFILINE Spray+Seal Wet Sealant","description":"\u003ch2\u003ePROFILINE Spray+Seal: The Intelligent Wet Sealant for Your Weekly Car Wash\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003e\"The simplest and fastest wet sealant: Spray, Rinse, Sealed – within 5 minutes during regular washing.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003cp\u003eYou wash your car every week or two. And every time you ask yourself: \u003cstrong\u003eHow do I easily maintain my paint protection?\u003c\/strong\u003e This is where \u003cstrong\u003ePROFILINE Spray+Seal\u003c\/strong\u003e from SONAX comes in – a wet sealant that frees you from this dilemma because it is \u003cstrong\u003eapplied directly during the car wash\u003c\/strong\u003e. No more complicated sealing rituals, no extra hours in the garage – just intelligent paint care that integrates into your existing routine.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3 biggest advantages\u003c\/strong\u003e of PROFILINE Spray+Seal at a glance:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime savings in detail:\u003c\/strong\u003e 5 minutes to seal your car during washing – no separate step required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant hydrophobicity:\u003c\/strong\u003e Water immediately beads off, dirt adheres less, water spots leave no stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe paint care for long-sealed surfaces:\u003c\/strong\u003e Specially developed for vehicles with long-term sealants – ideal for refreshing and maintaining.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003ePractical tip:\u003c\/strong\u003e Use PROFILINE Spray+Seal when rinsing your car. Spray it onto the still-wet paint, wait 30–60 seconds, then rinse with clear water – done! The effort is minimal, but the effect is immediately visible: The paint appears deeper, shinier, and remains hydrophobic.\u003c\/p\u003e\n\n\u003ch3\u003e1. What is a wet sealant and why do you need it?\u003c\/h3\u003e\n\n\u003cp\u003eA \u003cstrong\u003ewet sealant\u003c\/strong\u003e is a quick protective layer that you apply directly to your damp or wet paint – usually during washing, often without additional drying time. Unlike traditional hard waxes or full ceramic coatings, which need hours or days to cure, a wet sealant works immediately.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003edifference is crucial:\u003c\/strong\u003e You invest only a few extra seconds with each car wash and get a visible protective and gloss effect. This makes PROFILINE Spray+Seal the ideal \u003cstrong\u003emaintenance sealant\u003c\/strong\u003e if your car is already equipped with a base sealant or if you simply want an uncomplicated solution that fits into your washing routine.\u003c\/p\u003e\n\n\u003cp\u003eMost detailers and car owners use wet sealants for three reasons:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic effect:\u003c\/strong\u003e Water beads off instead of standing – this drastically reduces water spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gloss:\u003c\/strong\u003e The paint appears fresher, deeper, and mirror-like – ideal for color refreshment between more elaborate sealants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirt repellent:\u003c\/strong\u003e Dirt (insects, bird droppings, industrial fallout) adheres less firmly to the surface and is easier to remove.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e2. PROFILINE Spray+Seal in Detail: Composition and Properties\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eSONAX PROFILINE Spray+Seal\u003c\/strong\u003e is the wet sealant from the professional PROFILINE series – not the standard range, but the solution for demanding detailers and dedicated car owners. The formula is based on modern polymers and is specially optimized for application during car washing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe most important features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication during washing:\u003c\/strong\u003e Sprayable on wet paint, then rinse – sealed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use:\u003c\/strong\u003e No dilution, no preparation necessary – open, spray, rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application:\u003c\/strong\u003e Even beginners can apply PROFILINE Spray+Seal flawlessly; the formula forgives minor imperfections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic effect:\u003c\/strong\u003e Water visibly beads off, water droplets roll off the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface improvement:\u003c\/strong\u003e The paint appears deeper and shinier after application – not dull or sticky.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Germany:\u003c\/strong\u003e Developed and manufactured according to strict SONAX quality standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSize and yield:\u003c\/strong\u003e The 5-liter canister is sufficient for numerous washes. Depending on the vehicle size and spray method, you will need approximately 10–50 ml per wash, which offers an excellent cost-benefit ratio. A canister therefore lasts for small and medium vehicles for 50–100+ applications.\u003c\/p\u003e\n\n\u003ch3\u003e3. Practical Application: Step by Step\u003c\/h3\u003e\n\n\u003cp\u003eThe application of PROFILINE Spray+Seal is deliberately simple. Here is the proven procedure:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Your vehicle is washed and still wet. You fill PROFILINE Spray+Seal into a spray container (e.g., SONAX Spray Boy or a comparable pressure sprayer).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e You spray the sealant in fine, even streaks onto the still-damp paint. No perfect coverage is necessary – a loose layer is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDwell time:\u003c\/strong\u003e 30–60 seconds waiting time for the formula to react with the paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse:\u003c\/strong\u003e You thoroughly rinse the vehicle with clear water (preferably with a pressure washer or garden hose).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e Optionally, a light wiping with a lint-free microfiber cloth – but even without drying, the wet sealant does its job.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003ePro tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways spray PROFILINE Spray+Seal \u003cstrong\u003eonto wet paint\u003c\/strong\u003e – the product is designed for this.\u003c\/li\u003e\n\u003cli\u003eUse a \u003cstrong\u003efine spray pattern\u003c\/strong\u003e for even coverage; coarse dripping wastes material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not apply too thickly\u003c\/strong\u003e – a thin, even layer is completely sufficient. Thicker applications do not provide additional benefits.\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003ehydrophobicity is visible immediately after rinsing\u003c\/strong\u003e – you will instantly see water beading off the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e4. Durability and Long-term Effect: Realistic Expectations\u003c\/h3\u003e\n\n\u003cp\u003eA frequently asked question is: \u003cstrong\u003e\"How long does PROFILINE Spray+Seal last?\"\u003c\/strong\u003e The honest answer: \u003cstrong\u003eThat depends on your washing habits and external conditions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRealistic guidelines from practice and tests show:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater protection (hydrophobicity):\u003c\/strong\u003e 2–4 weeks with a visible water beading effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gloss:\u003c\/strong\u003e Visually clearly perceptible for 3–6 weeks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirt repellent:\u003c\/strong\u003e 2–8 weeks, depending on environmental exposure (heavy rain, industrial area, frequent driving wear out faster).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe advantage: \u003cstrong\u003eYou don't have to wait months for the next application.\u003c\/strong\u003e Because PROFILINE Spray+Seal is used with every car wash anyway, you regularly distribute the protection. This creates a continuous, stackable effect – your paint always remains protected and shiny, without you investing extra time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Durability is not to be understood like a 12-month ceramic coating, which is a mechanical barrier. PROFILINE Spray+Seal is a caring and protective layer that renews itself every week. That is the concept – and it works.\u003c\/p\u003e\n\n\u003ch3\u003e5. PROFILINE Spray+Seal in Context: When is it the Right Choice?\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePROFILINE Spray+Seal is perfect for you if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou wash your car \u003cstrong\u003eregularly (weekly to bi-weekly)\u003c\/strong\u003e – not just once a year.\u003c\/li\u003e\n\u003cli\u003eYou want an \u003cstrong\u003euncomplicated solution\u003c\/strong\u003e that can be applied without special knowledge.\u003c\/li\u003e\n\u003cli\u003eYour vehicle is already equipped with a \u003cstrong\u003ebase sealant\u003c\/strong\u003e (e.g., factory sealant, a previous ceramic coating) and you only want to refresh it.\u003c\/li\u003e\n\u003cli\u003eYou want to \u003cstrong\u003einvest a maximum of 5 minutes per wash\u003c\/strong\u003e for visual protection and shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater droplets and water spots\u003c\/strong\u003e are your main problem – PROFILINE Spray+Seal solves exactly that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePROFILINE Spray+Seal is NOT the first choice if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou need an \u003cstrong\u003eextremely durable protection for 6–12 months\u003c\/strong\u003e (then a professional ceramic coating is better).\u003c\/li\u003e\n\u003cli\u003eYour car is still \u003cstrong\u003ewithout any sealant\u003c\/strong\u003e and you need a \u003cstrong\u003ecomplete initial sealant\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eYou wash your vehicle \u003cstrong\u003eonly a few times a year\u003c\/strong\u003e – then a long-term sealant is more efficient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIn summary: \u003cstrong\u003ePROFILINE Spray+Seal is the weapon of choice for detailers and car owners looking for a simple, effective maintenance sealant that integrates seamlessly into regular car washing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"margin-top: 30px; padding-top: 20px; border-top: 2px solid #3498db;\"\u003e\u003cstrong\u003eConclusion:\u003c\/strong\u003e With \u003cstrong\u003ePROFILINE Spray+Seal from SONAX\u003c\/strong\u003e, you transform your car wash into a complete care program. You don't need special accessories, special knowledge, or hours in the garage. Just a ready-to-use solution that protects your paint, makes it hydrophobic, and brings it to a shine in 5 minutes. That's intelligent paint care.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"5 liters","offer_id":57345100480847,"sku":"D1-SNX-2435000","price":65.43,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-spray-seal_5l.png?v=1774731903"},{"product_id":"sonax-profiline-hypercoat-nassversiegelung","title":"PROFILINE HyperCoat Wet Sealant","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003ePaint Protection Directly from the Wash — SONAX PROFILINE HyperCoat Wet Sealant\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE HyperCoat do? This professional wet sealant is applied to the still-wet vehicle and rinsed off with water — laying down a thin, hydrophobic protective layer on the paint that builds gloss and water beading after every wash.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn professional vehicle care operations, efficiency is always as important as cleaning quality: every additional step costs time and resources. The \u003cstrong\u003eSONAX PROFILINE HyperCoat\u003c\/strong\u003e is the answer to the question of how to integrate paint protection and gloss enhancement into the regular washing process — without separate drying, degreasing, and sealing steps. As a wet sealant, HyperCoat is sprayed directly onto the damp vehicle after washing, allowed to dwell briefly, and then rinsed off with clear water. What remains is an even, hydrophobic film on the paint, which intensifies gloss, creates water beading, and provides light protection against dirt accumulation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegration into the washing process — sealing without an extra step.\u003c\/strong\u003e The decisive advantage of wet sealants over traditional dry waxes and polymer sealants lies in the application method: On the damp vehicle — after foam washing and rinsing — HyperCoat is sprayed on and simultaneously distributed and excess material rinsed off with the final water rinse. A complete drying step before sealing is not necessary. This significantly reduces the total duration of a detailing process with a sealing component.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydrophobicity and gloss effect after each application.\u003c\/strong\u003e The active ingredient formula of HyperCoat contains polymers and hydrophobic agents that settle as an even film on the paint surfaces during rinsing. This film creates the hydrophobic lotus effect: After treatment, water beads off the paint in droplets, carrying dirt particles with it and leaving hardly any water spots. At the same time, the polymers improve surface reflection and intensify the gloss effect — the vehicle looks more radiant after wet sealing than after a mere washing process without added care.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRegularly usable as a care cycle after every wash.\u003c\/strong\u003e HyperCoat is designed for repeated use with every vehicle wash — the protective film built up is partially degraded by the washing process, and reapplication after washing renews it. This care cycle ensures that the paint remains permanently protected and glossy, without the need for elaborate separate sealing sessions. Ideal for car washes and detailing businesses that want to offer their customers additional care benefits after every wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e HyperCoat shows the best results when applied to completely clean paint — dirt, limescale, and tar spots on the substrate reduce the even distribution and adhesion of the sealant polymers. Therefore, first wash thoroughly, then spray on HyperCoat. When applying to a damp vehicle: proceed panel by panel, allow to dwell briefly (30–60 seconds), then rinse evenly — no rubbing, the polymers settle by themselves. HyperCoat can also be used on glass, rims, and plastics, but for glass, a separate glass cleaner is the better solution for maximum streak-free results. For vehicles with an existing ceramic coating: HyperCoat temporarily enhances the lotus effect, is compatible with ceramic systems, and can be used as a topper product after every wash. For \u003ca href=\"\/en\/products\/sonax-profiline-spray-seal-nassversiegelung\"\u003eSONAX PROFILINE Spray+Seal\u003c\/a\u003e as a spray wet sealant for large-area applications, the 5-liter canister is recommended.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWet Sealant Technology — How Polymers Adhere to Damp Paint\u003c\/h3\u003e\n\u003cp\u003eThe operating principle of \u003cstrong\u003eSONAX PROFILINE HyperCoat\u003c\/strong\u003e is surprising at first glance: How can a sealant adhere to damp, water-covered paint? The key lies in the special formulation of the polymer emulsion: The active polymers in HyperCoat are suspended in an aqueous emulsion and designed to preferentially interact with the paint surface, even when it is covered by a film of water. The polymer molecules are oriented so that their hydrophobic ends face and bind to the paint surface, while their hydrophilic ends face outwards and are present in the water film.\u003c\/p\u003e\n\u003cp\u003eDuring the final rinse, excess polymer layers and the carrier water are washed off — what remains on the surface is a mono-molecular to a few nanometers thin polymer layer that adheres firmly to the paint. Although this layer is thinner and less durable than a dry-applied polymer sealant or even a ceramic coating, it offers a cost-effective and time-efficient alternative for regularly repeated applications. The combination of regular wet sealing (after every wash) can achieve a similarly good care effect in the long term as rarer, more elaborate dry sealants — through accumulation and constant renewal.\u003c\/p\u003e\n\u003cp\u003eThe hydrophobicity effect of HyperCoat polymers typically lasts several weeks before reapplication is advisable. This depends on the care conditions: Frequent washes, intensive UV exposure, and mechanical stress (driving in rain, automatic car wash) degrade the polymer layer faster than infrequent use and protected storage. In practice, it has proven effective to use HyperCoat with every exterior wash — a regular interval that keeps the protective effect permanently active without the need to plan separate sealing sessions.\u003c\/p\u003e\n\n\u003ch3\u003eApplying HyperCoat Correctly — Integration into Professional Washing Processes\u003c\/h3\u003e\n\u003cp\u003eThe wet sealant is always applied after the vehicle has been completely cleaned and before the final rinse. Step 1 — Wash the vehicle: Complete the regular washing process (pre-foaming, hand wash, or machine wash cycle) completely. The vehicle should still be damp after washing, but no excessive dirt should remain on the surface — loose dirt particles would be trapped when spraying HyperCoat, making the polymer layer uneven.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Apply HyperCoat: Spray the product evenly onto the damp vehicle. For spray bottles: Panel by panel from top to bottom, with about 20–30 cm distance to the surface and an even spray pattern. For larger vehicles (van, SUV), a foam sprayer or pressure pump is recommended for more even and faster distribution. Dwell time: 30–60 seconds per panel, during which the polymers can adhere to the surface. Do not let it dry.\u003c\/p\u003e\n\u003cp\u003eStep 3 — Rinse: Rinse the entire vehicle evenly with clear water (hose or pressure washer on a low setting). HyperCoat automatically distributes itself over the surface during rinsing, and excess amounts are rinsed off. After rinsing: Dry the vehicle (with a clean drying towel or by compressed air blower) and evaluate the result. An even, light gloss effect and visible water beading indicate successful application.\u003c\/p\u003e\n\u003cp\u003eIn car washes, HyperCoat can be integrated as the last step before drying into the automated washing process — through dosing systems or targeted spray bars in the final rinse section. This application is particularly economical, as HyperCoat can be dosed in large quantities, and the added benefit for the customer (visible gloss effect, water beading) can be marketed as a premium washing service.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Application for HyperCoat — When Wet Sealant is the Right Choice\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHyperCoat\u003c\/strong\u003e is particularly valuable in specific scenarios. Car washes and professional vehicle care businesses as a premium add-on: The \"Wash + HyperCoat Sealant\" offer is attractive to customers who want more than just clean but unprotected vehicles. The additional time required in the washing process is minimal, while the perceptible added value for the customer (visible gloss, water beading) is considerable — an attractive additional service argument for increasing revenue per vehicle.\u003c\/p\u003e\n\u003cp\u003eRegular vehicle care for fleet operators: When many vehicles need to be washed at short intervals, HyperCoat is economical as an integrated wash finish: no separate sealing appointment, no drying before sealing, no elaborate application process. The paint of fleet vehicles remains permanently in a well-maintained condition, which preserves resale value and prevents complaints about poorly looking company vehicles.\u003c\/p\u003e\n\u003cp\u003eAs a topper product for vehicles with an existing ceramic coating: Ceramic sealants lose their lotus effect over time, while the actual protective layer is still intact. HyperCoat as a topper after every wash reactivates the hydrophobicity and extends the lifespan of the customer's impression of the ceramic sealant — without affecting the ceramic layer itself or requiring elaborate ceramic refreshing work. This extends customer satisfaction and postpones the time for a complete re-sealing.\u003c\/p\u003e\n\n\u003ch3\u003eHyperCoat vs. Spray+Seal and Dry Sealants — The Right Sealant for Every Workflow\u003c\/h3\u003e\n\u003cp\u003eThe SONAX PROFILINE sealant range includes several wet sealant and quick sealant products for different application scenarios. The \u003ca href=\"\/en\/products\/sonax-profiline-spray-seal-nassversiegelung\"\u003eSONAX PROFILINE Spray+Seal\u003c\/a\u003e is a similar wet sealant available in 5-liter quantities for high-volume car wash integration — a more economical option for businesses with high vehicle throughput and dosing systems. HyperCoat in 1 liter is better suited for smaller businesses and manual application.\u003c\/p\u003e\n\u003cp\u003eCompared to dry sealants (PolymerNetShield, ceramic coatings), HyperCoat is inferior in terms of protective performance and durability — a fundamental compromise for time savings. Dry sealants offer several months to years of lasting protection from one application, while a wet sealant needs to be refreshed after a few weeks or after several washes. The advantage of wet sealant lies in its simplicity and integration into the washing process — those willing to use HyperCoat regularly can maintain permanently protected vehicles with minimal effort.\u003c\/p\u003e\n\u003cp\u003eFor an optimal strategy, we recommend: A full dry sealant (PolymerNetShield or ceramic coating) once a year as a long-term protective layer, supplemented by regular HyperCoat application after every wash as ongoing care. This combination offers both maximum long-term protective effect and regular refreshment of hydrophobicity and gloss — the complete care concept for professionally maintained vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE HyperCoat — Container and Application Recommendation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE HyperCoat\u003c\/strong\u003e is available in 1 liter. The 1-liter container is the right size for manual application in smaller businesses and for individual users — with economical dosing (1–2 ml per vehicle panel), one liter is sufficient for many applications. The wet sealant is ready to use and requires no dilution before use — direct spraying from the bottle or from a spray container is the recommended application method.\u003c\/p\u003e\n\u003cp\u003eFor car washes and large businesses that want to systematically integrate HyperCoat into the washing process, we recommend combining it with Spray+Seal in 5 liters for more economical supply. Both wet sealants complement each other: HyperCoat for manual applications and as a premium add-on in the hand wash area, Spray+Seal for automated dosing in the car wash area. Together, they fully cover the wet sealant requirements of a professional operation.\u003c\/p\u003e\n\u003cp\u003eIn summary, SONAX PROFILINE HyperCoat is the ideal product for all businesses and users who want to integrate paint protection and gloss into the regular washing process without extra effort. The wet sealant technology provides visible added value for the vehicle and customers after every wash — with minimal time expenditure and high economic efficiency in routine operation.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57345101824335,"sku":"D1-SNX-6773000","price":28.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-hypercoat_1liter.png?v=1774731856"}],"url":"https:\/\/detailing1.lu\/en\/collections\/profiline-nassversiegelung.oembed","provider":"Detailing1","version":"1.0","type":"link"}