{"title":"Poliermaschinenadapter","description":"\u003ch2 id=\"speakable-headline\"\u003ePoliermaschinenadapter\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003ePoliermaschinenadapter\u003c\/strong\u003e: Adapter verbinden freigegebene Maschinen- und Werkzeugaufnahmen. Die Verbindung wird nach Aufnahme, Drehrichtung und Belastungsgrenze gewählt; ein passendes Gewinde allein reicht als Freigabe nicht aus.\u003c\/p\u003e\n\u003cp\u003eGewinde, Aufnahme und Systemfreigabe müssen zusammenpassen; ähnliche Durchmesser allein belegen noch keine Kompatibilität.\u003c\/p\u003e","products":[{"product_id":"flex-dt-adapter-pxe80","title":"\"DT\" Adapter PXE 80","description":"\u003ch2\u003eFLEX DT Adapter PXE 80 — swappable orbit throw for rotary, 3mm, 6mm and 12mm polishing behaviour\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is the FLEX DT Adapter PXE 80? The FLEX DT Adapter is the swappable orbital drive for the PXE 80 12-EC polisher. It comes in four versions — DT-P (rotary), DT-XF 3 (3mm throw), DT-XF 6 (6mm throw) and DT-XF 12 (12mm throw) — and turns the same polisher into four functionally different tools for finishing, hologram removal and defect correction.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/flex-pxe8012ec-akku-exzenterpolierer-80mm-12v\"\u003eFLEX PXE 80 12-EC\u003c\/a\u003e is a dual-action polisher — but what \"dual-action\" actually means day-to-day comes down to which \u003cstrong\u003eFLEX DT Adapter\u003c\/strong\u003e you fit. The orbit throw — the radius the pad wobbles on as it works — is what really drives how aggressive the machine is, how it feels under your hand and the result you can pull out of the paint. A 3mm throw works fine and controlled; a 12mm throw brings more movement and more cut. With the DT Adapter system you pick that variable freely on the PXE 80 and swap it any time.\u003c\/p\u003e\n\u003cp\u003eThe idea is elegant: the \u003cstrong\u003eFLEX DT Adapter PXE 80\u003c\/strong\u003e is the mechanical link between the motor shaft and the PXE 80's backing-plate mount. It isn't bolted in for good — it's a quick-swap part. If you own four DT Adapters, you basically have four polishers in one housing — rotary for proper rotary work, 3mm for hologram-free finishing, 6mm for balanced defect correction and 12mm for heavy correction with plenty of material removal.\u003c\/p\u003e\n\u003cp\u003eFor pro detailing this system is a real edge over conventional dual-action polishers with a fixed throw. No buying several machines, no different tools for different stages — one PXE 80, four DT Adapters, four polishing characters. The modular setup makes the FLEX PXE 80 the most versatile mini dual-action polisher in its class, and it's one of the main reasons this machine has caught on so hard with pro detailers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour polishing characters out of one machine — rotary, 3mm, 6mm, 12mm.\u003c\/strong\u003e The DT-P adapter puts the PXE 80 in rotary mode — most cut, most heat, most control needed. The DT-XF adapters (3, 6, 12mm) switch on the orbital movement with a growing radius: 3mm for finishing and hologram-free work, 6mm as the all-round throw for defect correction and finishing in one pass, 12mm for heavy correction of deep scratches. You swap any version in seconds, no tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-swap system for a smooth multi-stage process.\u003c\/strong\u003e Keep a few DT Adapters ready with the backing plate already fitted and the pad already on, and you switch between stages in seconds — no pulling the pad, no swapping the plate, no re-mounting. Adapter out, next adapter in, keep polishing. In a multi-stage job (cut → compound → finish) this saves serious time and cuts down the breaks in your workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with FLEX backing plates and third-party backing plates.\u003c\/strong\u003e Besides the original FLEX backing plates (Ø30mm, Ø75mm), the DT-XF adapters also take compatible third-party backing plates such as APS (Ø50mm). That widens the pad range and lets you run every common polishing-pad format on the PXE 80 — from the small Ø30mm precision disc to the Ø75mm standard backing plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e For a pro multi-stage job on the PXE 80 we run three DT-XF adapters: DT-XF 12 with a cut pad for step 1 (defect correction), DT-XF 3 with a compound pad for step 2 (refining) and DT-XF 3 with a finish pad for step 3 (hologram-free finishing). Set all three up in advance, lay them out on the bench — then switching between steps takes 5 seconds instead of 2 minutes.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eOrbit throw and drive concept — how the DT Adapter sets the PXE 80's polishing character\u003c\/h3\u003e\n\u003cp\u003eThe heart of the \u003cstrong\u003eFLEX DT Adapter\u003c\/strong\u003e is the orbit throw — the offset between the motor-shaft axis and the plate axis. On a 3mm DT-XF adapter the pad wobbles on a circle with a 3mm radius around the machine axis; on the 12mm adapter, a circle with a 12mm radius. That difference may sound small, but it changes the polishing character from the ground up.\u003c\/p\u003e\n\u003cp\u003eA small orbit throw (3mm) makes a fast, fine circular motion. Abrasion is low, heat build-up is low, the hologram risk is minimal. For finishing work and the last polishing stage — where the paint is already close to flawless and you just want to bring it up to a high gloss — the 3mm throw is the better pick. It gets you maximum gloss with minimum risk of overworking the paint.\u003c\/p\u003e\n\u003cp\u003eA big orbit throw (12mm) makes a wide, slower motion. Material removal is higher, the cut more aggressive — like a machine putting more energy into the paint surface. For deeper scratches, oxidised paint or cars that haven't seen correction in ages, the 12mm throw is the more efficient tool. It works faster through stubborn defects, but it also asks for more control and a trained eye on how far you've cut.\u003c\/p\u003e\n\u003cp\u003eThe 6mm throw sits between the two extremes: aggressive enough for most everyday scratches and oxidation marks, yet gentle enough to keep the finish under control. For detailers who want one throw adapter that does the lot, the DT-XF 6 is the first call.\u003c\/p\u003e\n\u003cp\u003eOne thing worth understanding: the orbit throw isn't the only variable in how aggressive you polish. Pad type, polish type and machine speed all play a part too. A 12mm DT-XF with a soft finish pad can remove less than a 3mm DT-XF with an aggressive cut pad. The DT Adapter system hands you one more dial — not a limit. Get your head around it and those four adapters cover an exceptional range of results.\u003c\/p\u003e\n\u003ch3\u003eDT-P rotary vs. DT-XF — when each movement is the right call\u003c\/h3\u003e\n\u003cp\u003eAlongside the three orbital DT-XF versions there's the \u003cstrong\u003eDT-P adapter (rotary)\u003c\/strong\u003e, which turns the PXE 80 into a rotary polisher. In rotary mode the pad only spins around the machine axis — no orbital wobble, just pure rotation like a classic rotary polisher.\u003c\/p\u003e\n\u003cp\u003eRotary movement gives the most cut, the most heat and the most aggressive material removal. It's the go-to for the most stubborn deep scratches, old paint with heavily oxidised surfaces, or bodyshop work when re-spraying and finishing fresh paint. The downside: without orbital movement the risk of holograms and buffer trails climbs sharply. The DT-P asks for experience, control and — no exceptions — a finishing step afterwards with a DT-XF adapter.\u003c\/p\u003e\n\u003cp\u003eThe orbital DT-XF adapters, with their combined orbital and wobble movement, give clearly safer results for less experienced users — and they're usually the first choice in day-to-day detailing. The combo DT-P (first step) → DT-XF 3 (finishing) is a classic pro protocol for heavily oxidised surfaces: maximum cut with the rotary adapter, hologram-free finish with the 3mm orbital.\u003c\/p\u003e\n\u003cp\u003eStarting out without rotary experience, we'd leave the DT-P aside for now and begin with the DT-XF 6 and DT-XF 3. That pairing covers 95% of typical detailing jobs without taking on the risk of rotary-induced holograms. The DT-P is an add-on for advanced users, not a starter kit.\u003c\/p\u003e\n\u003ch3\u003eQuick swaps with several DT Adapters — the workflow edge in a multi-step process\u003c\/h3\u003e\n\u003cp\u003eThe real potential of the \u003cstrong\u003eDT Adapter system\u003c\/strong\u003e only opens up once you run several of them. A single DT Adapter with a backing plate fitted is a sensible buy; three or four prepped adapters change the workflow completely.\u003c\/p\u003e\n\u003cp\u003eThe idea is simple: each DT Adapter stays permanently fitted with the matching \u003ca href=\"\/en\/products\/flex-bpmpxe-klett-teller\"\u003eBP-M PXE backing plate\u003c\/a\u003e and its pad. The DT-XF 12 carries the cut pad, the DT-XF 6 the compound pad, the DT-XF 3 the finish pad. Switching between steps you only swap the adapter — no pad change, no plate change, no cleaning. What otherwise takes 2–3 minutes is done in 10 seconds.\u003c\/p\u003e\n\u003cp\u003eFor pro detailers running several cars a day, that time saving multiplies fast. Ten cars, three polishing steps each, two pad changes saved: 20 × 2 minutes = 40 minutes a day — off the back of one investment in three DT Adapters and prepped setups. So the DT system isn't just a technical feature, it's a solid productivity lever.\u003c\/p\u003e\n\u003cp\u003eIf your work often jumps between different areas of a car — big flat sides vs. tight details — you get an extra benefit: different DT-XF adapters can also carry different backing-plate sizes. The DT-XF 3 with a Ø30mm plate for detail work on doors and bumpers, the DT-XF 6 with a Ø75mm plate for bonnet and roof. A quick swap ties machine character and pad size together in one move.\u003c\/p\u003e\n\u003ch3\u003eFLEX DT Adapter compared — which version suits which job\u003c\/h3\u003e\n\u003cp\u003ePicking from the four \u003cstrong\u003eDT Adapter versions\u003c\/strong\u003e follows clear criteria based on defect depth, the cut you want and the way you like to work.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDT-XF 3\u003c\/strong\u003e (3mm throw, EUR 39.27) is the first choice for finishing enthusiasts, newcomers and anyone who mainly wants to keep polished paint looking its best. Low scratch risk, high hologram-freedom, maximum gloss with minimal removal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDT-XF 6\u003c\/strong\u003e (6mm throw, EUR 42.84) is the all-rounder. It covers the bulk of everyday jobs — light to medium scratches, oxidation marks, working in compounds — and still finishes nicely. If you can only buy one adapter, grab the DT-XF 6.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDT-XF 12\u003c\/strong\u003e (12mm throw, EUR 46.41) is for the tougher corrections: deeper scratches, heavily oxidised paint, bodywork. It asks for a bit more experience but gives the most material removal in orbital mode.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eDT-P\u003c\/strong\u003e (rotary, EUR 22.61) is aimed at experienced users who need rotary polishing for extreme corrections or for pro reasons. It's the cheapest model, but not a beginner's tool.\u003c\/p\u003e\n\u003ch3\u003eBuying the FLEX DT Adapter — how it fits into the PXE 80 accessory system\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX DT Adapter PXE 80\u003c\/strong\u003e is the indispensable link between the PXE 80 polisher and the \u003ca href=\"\/en\/products\/flex-bpmpxe-klett-teller\"\u003eBP-M PXE backing plate\u003c\/a\u003e. No DT Adapter, no backing plate; no backing plate, no polishing pad — the DT Adapter is literally the heart of the PXE 80 setup.\u003c\/p\u003e\n\u003cp\u003eFor a full start we'd begin with the \u003ca href=\"\/en\/products\/flex-pset1222q-akku-set-12v\"\u003eP-Set 12-22 Q\u003c\/a\u003e and pick the DT-XF 6 as your first adapter. As step two, the DT-XF 3 rounds out the setup for hologram-free finishing. Working professionally, you complete the system with the DT-XF 12 for aggressive correction steps — and that covers the PXE 80's full multi-stage profile in three adapters.\u003c\/p\u003e\n\u003cp\u003ePaired with the \u003ca href=\"\/en\/products\/flex-bpmsrd30-spezial-klebe-teller\"\u003eBP-M\/SR D30 special adhesive plate\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/flex-fs140-polier-kegel-ve5\"\u003eFS 140 polishing cones\u003c\/a\u003e, the DT Adapters together with the PXE 80 make the most complete mini polishing system on the market — from the big body panel right into the tightest trim seam.\u003c\/p\u003e","brand":"FLEX","offers":[{"title":"DT-P \"492396\" (rotary)","offer_id":57377617510735,"sku":"D1-FLEX-492396","price":22.61,"currency_code":"EUR","in_stock":false},{"title":"DT-XF 3 \"492418\" (3mm stroke)","offer_id":57377617543503,"sku":"D1-FLEX-492418","price":39.27,"currency_code":"EUR","in_stock":false},{"title":"DT-XF 6 \"531009\" (6mm stroke)","offer_id":57377617576271,"sku":"D1-FLEX-531009","price":42.84,"currency_code":"EUR","in_stock":false},{"title":"DT-XF 12 \"492426\" (12mm stroke)","offer_id":57377617609039,"sku":"D1-FLEX-492426","price":46.41,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-dt-adapter-pxe-80-dt-p-492396-rotativ-492396.png?v=1775058636"}],"url":"https:\/\/detailing1.lu\/en\/collections\/poliermaschinenadapter.oembed","provider":"Detailing1","version":"1.0","type":"link"}